29 May 2014

579. TEMPerHum (0c45:7402 ) on debian linux wheezy

Yet another little usb device from PC sensors (I seem to have been giving them a fair amount of money recently ).

This is the device in question: http://pcsensor.com/index.php?_a=product&product_id=178 (note that I buy my devices via ebay where the prices are apparently always the campaign ones -- I paid AUD25 , not USD80)

It didn't come in a box so I have no scans or shots to show.

[See here for the regular TEMPer USB device (0c45:7401), and here for the TEMPer 1K4  (0c45:7403) USB thermocouple reader. Note that since the temper-usb code is in  a lot of flux you can't use the line numbers in those posts directly -- you'll have to read and understand the code before pasting it in. Luckily, it's quite simple -- even I managed to sort it out!]

I couldn't get temper-usb to work even when making (what I consider) the necessary edits, but instead got lots of errors (including " usb.USBError: could not detach kernel driver from interface 1: No data available"). So I finally gave up.

Instead, web searching led me to http://edorfaus.wordpress.com/2012/07/02/new-library-examples-and-features/ -- one of the replies by eg1l spelled out the solution -- I'll grant myself the liberty to repost it here, but please remember where it originally came from and link to the original article (exclusively or in addition).

mkdir ~/tmp
cd ~/tmp/
sudo apt-get install libudev-dev libusb-1.0.0-dev libfox-1.6-dev autoconf cmake

git clone git://github.com/signal11/hidapi.git
cd hidapi/
./bootstrap
./configure
cd libusb/
make
sudo make install

cd ../../

git clone git://github.com/edorfaus/TEMPered.git
cd TEMPered/
mkdir build
cd build/
cmake ..
make
cd utils/
sudo ./tempered 
cd ../
sudo make install

sudo ln -s /usr/local/lib/x86_64-linux-gnu/libtempered.so.0 /usr/local/lib/libtempered.so.0
sudo ln -s /usr/local/lib/x86_64-linux-gnu/libtempered-util.so.0 /usr/local/lib/libtempered-util.so.0
sudo ldconfig

sudo tempered
0006:000e:01 0: temperature 21.75 °C, relative humidity 49.1%, dew point 10.6 °C

Create an 80-temper.rules file in /etc/udev/rules.d:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0c45", ATTRS{idProduct}=="7401", GROUP="users", MODE="0666"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0c45", ATTRS{idProduct}=="7402", GROUP="users", MODE="0666"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0c45", ATTRS{idProduct}=="7403", GROUP="users", MODE="0666"

Then do
sudo usermod -a -G users $USER

And
sudo service udev restart

Unplug and re-plug your device, then open a new terminal and you're set (type group to make sure that users show up).

me@boron:~$ tempered
0006:000f:01 0: temperature 23.34 °C, relative humidity 46.8%, dew point 11.3 °C

20 May 2014

578. More Gnome issues -- semi-rant

I was able to get on with work in spite of transitioning to gnome 3 -- but only thanks to the frippery extensions:
http://verahill.blogspot.com.au/2011/11/debian-testing-64-bit-gnome-3gnome.html 
http://verahill.blogspot.com.au/2013/04/402-very-briefly-what-i-forgot-about.html

And then gnome-screenshot got crippled, but I managed to cope with that by patching it:
http://verahill.blogspot.com.au/2012/06/fixing-gnome-screenshot-341-in-debian.html

I'm using debian testing (jessie) on my laptop and since I normally don't do much on it other than occasionally log into work to check on jobs I have been able to ignore the issues that are so apparent in gnome 3.12, two of which are:

*  gnome-terminal doesn't have a transparent background option since ersion 3.8 -- instead of being able to read what's underneath (e.g. a blog post with a how-to), and thus making good use of the screen real estate, my laptop screen is now feeling very, very small.

[And the developer seems to have the usual gnome attitude issue: https://bugzilla.gnome.org/show_bug.cgi?id=698544 ]

gnome-terminal 3.12
 There's basically nothing that has forced me to stay with gnome-terminal, so switching terminals was a simple matter of installing xfce4-terminal instead, which looks pretty much like gnome-terminal used to. Besides, I use guake more of the time anyway.

xfce4-terminal

 * you can't resize 'native' gnome programs, such as nautilus, that are in full-screen mode. Well, you can -- by holiding super (i.e. windows button) + down arrow. But the icons in the top right corner are no longer, and I find that incredibly annoying.
Nautilus. Nautilus shows when dropbox is synced -- thunar doesn't.

Thunar -- like nautilus of days gone by
 There are two things that I need from nautilus (other than working as a filemanager, of course, and allowing me to open terminals where I want which is something thunar supports 'out of the box') -- the ability to batch resize images, and dropbox. Now, dropbox has nothing to do with nautilus and the dropbox server will run happily in the background whether you're using a file manager or not. It would be nice if thunar would show whether the dropbox folder is synced or not, but it's hardly crucial.

Image resizing is a different matter since we maintain our own little website with personal photos for overseas members of our families. Ergo, it's crucial.

Luckily, this is pretty easy:
sudo apt-get install simple-image-reducer

Go to Edit/Configure custom actions... and set command to simple-image-reducer %F, and scope to apply to images, as shown in the screenshots.





I'm sure there are lots of other small issues in gnome 3.12 that I either keep missing or wilfully ignore in the interest of maintaining a low blood pressure. The whole idea of removing features that are actually useful with no way of re-enabling them smacks of 'we know better than you', and that irks me.

15 May 2014

577. Skype and webcam on debian wheezy: black screen

This is another shameless re-posting of a solution published by others. See e.g. 
http://community.skype.com/t5/Linux/Webcam-is-not-working-on-skype-with-Ubuntu-12-04/td-p/858418
https://bbs.archlinux.org/viewtopic.php?id=95388
http://ubuntuforums.org/showthread.php?t=966882

Why am I doing this? Mostly because this blog doubles as a notebook where I can write down solutions that worked for me so that I don't find myself scouring the internet over and over again for the same solution.

I hope that I'm adding a bit of value by providing step-by-step solutions and snazzy screenshots though.

The issue:
even though the camera is working fine there's only a completely black picture in skype (not underexposed -- just plain black):






The solution:
Use LD_PRELOAD to load the 32 bit V4L library (which you need to have installed -- use apt-file to find out what package). You can either start skype from the command line, or make changes to the launcher, either via main menu  as shown in the screenshot or by editing ~/.local/share/applications/skype.desktop i.e. run skype with 
env LD_PRELOAD="/usr/lib/i386-linux-gnu/libv4l/v4l1compat.so" skype


 At this point starting skype + webcam should be a happy marriage:
(aside from exposure, white balance etc. etc.)

13 May 2014

576. Shortening the bash prompt in debian

This is yet another post in which I'm (almost) simply reposting a solution that someone else has already posted online.

Let's say that my contribution is to put it in context of debian.

Either way, here's the problem that needed solving: the debian prompt by default lists all directories, which sometimes means that the prompt itself breaks across two lines.

Luckily, it's not difficult to chop the prompt down to a more manageable, yet still informative, length. The solution is here (we do like a descriptive URL): http://superuser.com/questions/387673/how-can-i-limit-the-number-of-directories-in-my-prompt

That particular solution also allows you to change the permissible length of the path that will be shown -- change the 50 in the argument to droppath to set the number of chars.

Edit your ~/.bashrc and add the bits in red:
# drops first portion of a path $1 if length is greater than $2 function __droppath { if [[ ${#1} -gt $2 ]]; then p=$1 while [ ${#p} -gt $2 ]; do p="/"$(echo "$p"|cut -d"/" -f3-) done echo "..."$p else echo $1 fi } if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]$(_droppath "\w" 50)\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h: $(__droppath "\w" 50)\$ ' fi

and here's an example using a length of 25 chars (which is a bit short).

Unmodified:
me@niobium: /usr/local/lib/python2.7/site-packages$\

Modified:
me@niobium: .../python2.7/site-packages$

You can always use pwd to figure out what the full path is if necessary:
me@niobium: .../python2.7/site-packages$ pwd
/usr/local/lib/python2.7/site-packages

12 May 2014

575. Gaussview: CConnetctionGFCHK::Parse_GFCHK() Missing or bad data: Alpha Orbital Energies Line Number XXXX

I've been getting a fair number of errors when trying to open .fchk files with gaussview 4.x that I've generated using g09. In particular, I've been getting this:



Thinking that it might have something to do with the version of gaussview being too old, I tried gaussview 5.x, which throws the same error. Gaussview (4.x), by the way, runs fine in wine 1.7.

Turns out it's a poorly written piece of software -- gaussview can't properly parse output generated by gaussian. Great...neither piece of software is cheap. Better yet, gabedit does not have any issue reading the unmodified fchk file.

If you do need to use gview though, the solution is outlined here: http://www.ccl.net/cgi-bin/ccl/message-new?2012+07+18+005

Briefly, edit your fchk file and change the "Number of basis functions" to the same number as is shown for the "Number of independent functions" i.e. change
1 alpha 2 FOpt RB3PW91 Gen 3 Number of atoms I 101 4 Info1-9 I N= 9 5 89 86 0 0 0 100 6 2 18 -602 7 Charge I 7 8 Multiplicity I 1 9 Number of electrons I 530 10 Number of alpha electrons I 265 11 Number of beta electrons I 265 12 Number of basis functions I 2015 13 Number of independent functions I 2005 14 Number of point charges in /Mol/ I 0 15 Number of translation vectors I 0
to
1 alpha 2 FOpt RB3PW91 Gen 3 Number of atoms I 101 4 Info1-9 I N= 9 5 89 86 0 0 0 100 6 2 18 -602 7 Charge I 7 8 Multiplicity I 1 9 Number of electrons I 530 10 Number of alpha electrons I 265 11 Number of beta electrons I 265 12 Number of basis functions I 2005 13 Number of independent functions I 2005 14 Number of point charges in /Mol/ I 0 15 Number of translation vectors I 0
And that's it.

09 May 2014

574. Texmaker and texlive on windows xp

There are two ways of dealing with latex on windows -- either using native packages or via cygwin. Here's the  native approach, which I tested in a virtual machine with Windows XP SP2

 
1. Install texlive

Go to http://www.tug.org/texlive/acquire-netinstall.html and download http://mirror.ctan.org/systems/texlive/tlnet/install-tl.exe

Run the file. You'll now be taken through the installation of texlive. Note that the full installation is ca 3.7 Gb and it will take a few hours to download and install. On the other hand, space is cheap and most people (in academia) don't pay for bandwidth, so it's not a bad idea to do the full install.

Anyway, here are a few screenshots of the installation process:



It's a good idea to change the mirror to speed up the download



Uncheck TexWorks since we'll be installing TexMaker


This step can take many hours


Finally done.


2. Install texmaker

Go to http://www.xm1math.net/texmaker/download.html and download http://www.xm1math.net/texmaker/texmakerwin32_install.exe

The same file will work on XP, Vista and 8 (and presumably 7, which is more or less a patched version of Vista) and it will work on both 32 and 64 bit systems.

Install texmaker.


3. Configure  texmaker
Start texmaker

Go to Options/Configure Texmaker.

Under Commands you can select to use an external pdf viewer. Note that you will need to make sure that the path is correct -- in my case it was pointing to adobe reader 11, whereas I had adobe reader 9 installed. Easy enough to change, but you need to do it manually. The embedded/internal pdf viewer works ok, but distorts the text and figures somewhat (everything got a bit squashed)
Choose internal or external pdf viewer. Make sure the path is correct
Under Quick Build you can tick Latex+Bib(la)tex+Latex(x2)+dvips+ps2pdf+View pdf. NOTE: if you do this you won't be able to compile any file which hasn't got a \cite command and a mathing .bib file.

Alternatively, pick latex + dvips + ps2pdf + View pdf.

Quick Build -- pick the one with bibtex in it
Under Editor you can disable code completion (which can get annoying at times):

You can now load a tex file and hit F1 to compile it:


Quick test example

0. Create a folder called e.g. testtex
 
1. Download UCSD.eps from here: http://vectorlogotypes.net/logo/68332_UCSD.htm

Put it in the testtex folder.


2. Create the following anothertest.bib file in either texmaker or notepad:
@Article{2014:example,
  AUTHOR = {Placeholder, A},
  TITLE = {Comprehensive title},
  YEAR = 2014,
  JOURNAL = {J. Comp. Chem.},
  VOLUME ={45},
  PAGES = {100-101}
}
Put it in the testtex folder.

3. Create a new tex file in texmaker:


Make sure to tick graphicx

Basic tex file
Save to your testtex folder.

4. Edit your tex file as shown below::
\documentclass[10pt,a4paper]{article}
\usepackage[utf8]{inputenc}
\usepackage{amsmath}
\usepackage{amsfonts}
\usepackage{amssymb}
\usepackage{graphicx}

\usepackage{url}
\title{This is a test}

\begin{document}

\section{The test}
This is a simple test which consists of inserting a figure and adding a reference via bibtex. You can download the logo from \url{http://vectorlogotypes.net/logo/68332_UCSD.htm}. Put the UCSD.eps file in the same directory as your .tex file.
\begin{figure}
 \includegraphics{UCSD.eps}
 \caption{UC San Diego logo.}
 \label{fig:test}
\end{figure}

Here's a citation.\cite{2014:example}

\bibliography{anothertest}
\bibliographystyle{ChemEurJ}
\end{document}
5. Compile.
If you set up your F1 as shown above (i.e. with bibtex support), then all you need to do is hit F1. Otherwise, if you used the alternative setup, do F2 (latex), F11 (bibtex), F2 (latex), F11 (bibtex), F1 (compile and view).